How to Clean Air Compressor Tank Inside? 5 Best Ways to follow?

The Air compressor tank is one of the most exposed parts of a compressor. It is exposed on all four sides and is susceptible to damage and contamination. In that light, it makes sense to put it through the proper cleaning process to ensure that the internal components of the compressor remain healthy for a long time.

As the air compressor tank is a container of air, the biggest enemy of the air compressor is rust. The rust can lead to air contamination and the explosion of the air compressor.

There are a few ways to clean the inside of an air compressor tank. One is to use a water and detergent mixture, another is to use a solution of vinegar and water, and another is to use a solution of hydrogen peroxide and water.

What are the Main Causes of the Dirty Air Compressor Tank?

There are many causes of the dirty air compressor tank. The main causes of the dirty air compressor tank are improper maintenance, incorrect installation, and lack of regular cleaning. There are many possible causes of the dirty air compressor tank, and the most common cause is when dirt, dust, and other particles get into the air compressor’s engine.

When the air compressor is not used for a long time, the oil and grease used to lubricate it will drain out and form a layer on top of the water in the compressor’s engine. This layer will collect dirt, dust, and other particles over time. If something is blocking the airflow into or out of the air compressor’s engine, this will also cause dirt and dust to accumulate.

How often should I service my air compressor?

If you want to extend the life of your air compressor, you need to drain the air compressor tank regularly to prevent it from becoming clogged and causing problems. Additionally, regular draining will ensure the tank does not overflow. However, you can drain the tank every 3-6 months or when the level reaches a certain point (depending on the brand and model of the air compressor).

A high-quality air compressor tank should last for a long time, provided it is in good condition and well-maintained. The frequency of how often you need to drain depends on the type of air compressor you have and the purpose it is used for.

How do you clean the inside of a compressor tank inside?

Cleaning the inside of a compressor tank is critical to maximizing the lifespan of the entire compressor system. If dirt, debris, and oily residue are allowed to build up, you will experience problems with operation and efficiency.

Disconnect the All-Necessary Parts:

First, disconnect the power supply and make sure that the unit is not running. You need to turn off the water inlet valve and make sure it is completely closed. And also, disconnect the hose from the spray nozzle and hold it so that there is no pressure.

Remove All Kinds of Dust and Debris

Open the tank and remove any debris blocking the filter orifice. You can use a brush or vacuum cleaner to remove the dirt, dust, and debris that has accumulated inside your tank.

Wipe Down a Cloth

After cleaning the inside of the tank with a damp cloth, wipe down the outside of the tank to remove any cleaner.

Use Boiling Water

Pour a pot of boiling water into the tank, turn off the power, and wait 10 minutes. After 10 minutes, turn on the power and let it run until it cools down. Pour a pot of cold water into the tank and drain it. Remove any debris that has been collected in the bottom of the tank.

Use a Pressure Washer

You can use a pressure washer with a detachable nozzle to clean the tank. Make sure you wear protective gear (like goggles) and avoid getting water inside the engine or compressor.

Wipe the remaining water and dirt with a cloth

Wipe down all surfaces with a cloth or sponge to remove any remaining water and dirt.

How do you clean up air compressors with phosphoric acid?

Phosphoric acid is a type of acid used to clean tanks and other parts of air compressors. It is a very effective cleaner and can be used in other cleaners such as water or detergents.

To use phosphoric acid to clean an air compressor tank, you must mix it with water and then pour it into the tank. You should then turn on the air compressor and wait until the tank is full of the acid solution before turning off the compressor.

Once the tank is complete, you can rinse it out with water and dry it off. Make sure to wear gloves and eye protection when using this cleaner because it can be dangerous if it gets in your eyes or onto your skin.

How to maintain an air compressor?

Air compressors are virtual machines used to reduce objects’ size. They work by using air pressure to decrease the volume of an object.

It is essential to keep the following things in mind to maintain an air compressor,

  • Check the oil level regularly. Checking the oil level will help you determine when to replace the oil filter or change the air compressor belt.
  • Keep the compressor clean. Make sure to clean it every time you use it, even if there is no debris present. Dirt and dust can build up over time and cause compressor performance problem problems.
  • Clean the compressor regularly with a mild soap and water solution.
  • Inspect all moving parts for wear and tear, and replace them if necessary.
  • Keep the area around the compressor clean to avoid debris build-up that can lead to damage or stoppage of the compressor.
  • Check the belts and pulleys regularly. Belts and pulleys can become stretched or damaged over time, which can lead to poor compression or even failure of the machine. Check them often to make sure they’re in good condition.
  • Avoid overloading the air compressor by using too much pressure or weight.
  • Store the air compressor in a safe place where weather conditions or other objects will not damage it.

Final Words

Cleaning the inside of a compressor tank is not an easy task, but with the right cleaning products and the right technique, you can clean your air compressor in no time.  A dirty air compressor can lead to many problems such as overheating, poor performance, increased wear and tear on the machine, etc.

The best way to clean the inside of an air compressor tank is by using a high-quality compressed air system that has been tested and approved by a professional technician or certified service center. To know more about how to clean an air compressor tank, visit our blog post today!